The RD V-Series 60A 12S ESC is a Made in India trapezoidal electronic speed controller for high-performance applications, supplied in an aluminium alloy enclosure rated IP56.
It runs on 4S to 12S LiPo packs and delivers 40 A continuous and 60 A peak for up to 30 seconds, tested in 12 m/s airflow at 32 °C ambient. It accepts PWM and DShot300 input and reports telemetry with PWM and DShot.
| S. No. | Parameter | Requirement | Remark |
| 1 | Voltage range | 4S (14.8V) – 12S (52.2V) | – |
| 2 | Commutation | Trapezoidal | – |
| 3 | Maximum Peak Current | 60A (30 s) | Tested in 12 m/s continuous airflow and 32°C ambient Temperature |
| 4 | Maximum Peak Power | 3000 W (30 s) | Tested in 12 m/s continuous airflow and 32°C ambient Temperature |
| 5 | Maximum Continuous Current | 40A | Tested in 12 m/s continuous airflow and 32°C ambient Temperature |
| 6 | Maximum Continuous Power | 2000 W | Tested in 12 m/s continuous airflow and 32°C ambient Temperature |
| 7 | Weight | 100 gm (Incl. Wire) | – |
| 8 | Dimension | 94.80mm x 35mm x 15mm | – |
| 9 | BEC Output Voltage | No | – |
| 10 | Operating Ambient Temperature | (-20℃) ~(+ 65℃) | – |
| 11 | Standby current (24V) | ≤ 36mA | – |
| 12 | Throttle Range | 1050us ~ 1950us | – |
| 13 | Recommended Throttle refresh frequency | 50 Hz to 450 Hz | – |
| 14 | Throttle I/P mode | PWM and D-Shot 300 | – |
| 15 | Over Temperature Protection | Yes | Limit at 100℃, Reduced to 50% throttle |
| 16 | Overcurrent Protection | Yes | – |
| 17 | Stuck Rotor Protection | Yes | – |
| 18 | Waterproof Rating | IP56 | – |
| 19 | Invert Motor Spin | Yes | Configured using RD GUI |
| 20 | Telemetry | Yes | With PWM and D-Shot |
| 21 | Input cables | Silicone wires-red/black- 12 AWG (14cm) | ±1cm |
| 22 | Output cables | Silicone wires-black(x3) – 14 AWG (14cm) | ±1cm |
| 23 | Signal wires | Silicone wires – black , white(2P),red(1P) 3P-JR Connector (16cm) | ±1cm |
| 24 | Enclosure | Yes | Aluminium Alloy |