Reflex Drive’s 4-in-1 ESC is an ultra-lightweight, high-power controller for demanding UAV propulsion systems, supporting 4S to 6S operation.
It delivers 85 A continuous for 8 minutes and 100 A peak for 180 seconds with active cooling, accepts PWM and DShot300 input, and reports voltage, current, PCB temperature and motor eRPM telemetry.
| S. No. | Parameter | Requirement | Remark |
| 1 | Input Voltage | 4 – 6S LiPo | – |
| 2 | Continuous Current | 85A (8min , With Active Cooling) | Tested in continuous airflow and 34℃ ambient Temperature |
| 3 | Peak Current | 100A (180s, With Active Cooling) | Tested in continuous airflow and 34℃ ambient Temperature |
| 4 | BEC Output Voltage | No | – |
| 5 | Operating Ambient Temperature | (-20℃) ~(+75℃) | – |
| 6 | Standby current (24V) | ≤ 60mA | – |
| 7 | PWM Range (Can be calibrated) | 1050us ~ 1950us | Calibration Enable |
| 8 | Recommended Throttle refresh frequency | 50Hz | – |
| 9 | Throttle I/P mode | PWM & DShot300 | – |
| 10 | Over Temperature Protection | No | – |
| 11 | Over Current Protection | No | – |
| 12 | Stuck Rotor Protection | Yes | – |
| 13 | Waterproof Rating | Conformal Coated | Conformal Coated |
| 14 | Startup Protection | Yes | – |
| 15 | Telemetry | Yes | Voltage, Current, PCB Temperature, Motor eRPM NOT in DShot300 |
| 16 | Braking Feature | Yes | – |
| 17 | Signal & Telemetry / wires | 8P JST connector 28 AWG (30cm) | ±1cm |
| 18 | Length | 42.5 mm | ±1mm |
| 19 | Width | 61.72 mm | ±1mm |
| 20 | Height | 10.02 mm | ±0.02 mm |
| 21 | Weight (Incl. ESC with Signal wire) | 54gm | ±1g |
2D CAD, 3D CAD files and datasheets for this product are available in the Downloads section.