RD R6 V5 IPU Base with FOC 80A ESC (ESC and Mounting Only)

RD R6 V5 IPU Base with FOC 80A ESC (ESC and Mounting Only)

RD R6 V5 IPU Base with FOC 80A ESC (ESC and Mounting Only)

₹8,286

Per unit, for orders of up to 9 units, excl. GST. Discounts apply to volume orders: for 10 units or more, contact [email protected]. See the full price list

Price on requestContact [email protected] for a quote. Discounts apply to volume orders.

Pricing will be announced at launch. Contact [email protected] for availability and early orders.

In stock

Check motor compatibility before ordering. Please confirm this ESC is qualified for your motor in our list of qualified FOC combinations.

FOC ESCs must be tuned and certified with your motor and load (propeller) at our factory before use. They cannot be tuned in the field.

For any doubts, contact our sales team at [email protected] or +91 91511 18036.

Product Description

The RD R6 V5 IPU Base with FOC 80A ESC is supplied as an integrated base with a FOC 80A electronic speed controller, for motor manufacturers and UAV OEMs who bring their own motor. The supply covers the ESC and the mounting only. The motor is not included.

The ESC runs on 6S to 12S with 40A continuous current and 80A (180 s) peak current, and communicates over PWM and UAV-CAN with telemetry over CAN. Made in India, with non-China sourced semiconductors.

Specifications

S. No. Parameter Requirement  Remark
1 Input Voltage 6S-12S LiPo
2 Continuous Current (A) 40A
3 Peak Current (180 s) 80A (180 s)
4 BEC Output Voltage No –
5 Operating Ambient Temperature (℃) (-20℃) ~(+ 65℃) ±5℃
6 Operating Humidity (%) 15% ~ 85%RH ±5%RH
7 Standby Current (at 48V) ≤ 80mA –
8 Throttle Range 1050us ~ 1950us –
9 Throttle Refresh Frequency 50 ~ 450Hz –
10 Input Signal PWM & CAN –
11 Telemetry Over CAN only Voltage, Current, Motor RPM, PCB Temperature, Fault status 
12 Input Signal Isolation Yes (PWM only)
13 Braking Feature Yes
14 Invert Motor Spin Yes Using CAN
15 Over Temperature Warning (OTW) PCB temperature above 110℃ –
16 Stuck Rotor at Start-up Motor stuck or can’t rotate –
17 Bad Motor Phase at Start-up Motor phase not connected properly –
18 Over Voltage Protection (OVP) Voltage above 67V –
19 Under Voltage Protection (UVP) Voltage below 20V –
20 Over Current Protection (OCP) Peak current above 120A –
21 Motor Phase Short Circuit Two phases of the ESC output are electrically shorted –
22 Signal Loss Protection & Warning ESC is not receiving the PWM or CAN throttle –
23 Protection Reporting All protections and warnings are visible over CAN telemetry –
24 Input cables Silicone wires, red/black, 12AWG, 10 cm –
25 Output cables Silicone wires, black, 14AWG, 12 cm –
26 Signal wires Black, white (2P), 19 cm –
27 CAN wires Black, white, red (3P), 19 cm –
28 Enclosure Aerospace-grade aluminium, black anodised –
29 Measurement Location Data measured in Lucknow, India at an altitude of 123 m above sea level –
Dimensions 93 x 38 x 29 mm
Weight (Inc. wires) 177 g
Control Method Field Oriented Control (FOC) –
CAN Control Yes –

Engineering Data

2D CAD, 3D CAD files and datasheets for this product are available in the Downloads section.