- [email protected]
- +91 9151118036
The RD R8 IPU Base with FOC 80A ESC is supplied as an integrated base with a FOC 80A electronic speed controller, for motor manufacturers and UAV OEMs who bring their own motor. The supply covers the ESC and the mounting only. The motor is not included.
The ESC runs on 14S with 40A continuous current and 80A (180 s) peak current, and communicates over PWM and UAV-CAN with telemetry over CAN. Made in India, with non-China sourced semiconductors.
| S. No. | Parameter | Requirement | Remark |
| 1 | Input Voltage | 14S | |
| 2 | Continuous Current (A) | 40A | |
| 3 | Peak Current (180 s) | 80A (180 s) | |
| 4 | BEC Output Voltage | No | – |
| 5 | Operating Ambient Temperature (℃) | (-20℃) ~(+ 65℃) | ±5℃ |
| 6 | Operating Humidity (％) | 15% ~ 85%RH | ±5%RH |
| 7 | Standby Current (at 48V) | ≤ 80mA | – |
| 8 | Throttle Range | 1050us ~ 1900us | – |
| 9 | Throttle Refresh Frequency | 50 ~ 450Hz | – |
| 10 | Input Signal | PWM & CAN | – |
| 11 | Telemetry | Over CAN only | Voltage, Current, Motor RPM, PCB Temperature, Fault status |
| 12 | Input Signal Isolation | Yes (PWM only) | |
| 13 | Braking Feature | Yes | |
| 14 | Invert Motor Spin | Yes | Using CAN |
| Over Temperature Warning (OTW) | PCB temperature above 110℃ | – | |
| Stuck Rotor at Start-up | Motor stuck or can’t rotate | – | |
| Bad Motor Phase at Start-up | Motor phase not connected properly | – | |
| Over Voltage Protection (OVP) | Voltage above 67V | – | |
| Under Voltage Protection (UVP) | Voltage below 20V | – | |
| Over Current Protection (OCP) | Peak current above 120A | – | |
| Motor Phase Short Circuit | Two phases of the ESC output are electrically shorted | – | |
| Signal Loss Protection & Warning | ESC is not receiving the PWM or CAN throttle | – | |
| Protection Reporting | All protections and warnings are visible over CAN telemetry | – | |
| Input cables | Silicone wires, red/black, 12AWG, 10 cm | – | |
| Output cables | Silicone wires, black, 14AWG, 12 cm | – | |
| Signal wires | Black, white (2P), 19 cm | – | |
| CAN wires | Black, white, red (3P), 19 cm | – | |
| Enclosure | Aerospace-grade aluminium, black anodised | – | |
| Measurement Location | Data measured in Lucknow, India at an altitude of 123 m above sea level | – |
| Dimensions | 93 x 38 x 29 mm | ||
| Weight (Inc. wires) | 177 g | ||
| Control Method | Field Oriented Control (FOC) | – | |
| CAN Control | Yes | – | |
| Recommended Motors | RD6218 160KV (RD 2480 foldable); Vector 8015 pro 100KV (Vector 3010 foldable); RD8015 115KV (HW 3011 foldable) | – |