₹6,427
Per unit, for orders of up to 9 units, excl. GST. Discounts apply to volume orders: for 10 units or more, contact [email protected]. See the full price list
Price on requestContact [email protected] for a quote. Discounts apply to volume orders.
Pricing will be announced at launch. Contact [email protected] for availability and early orders.
Limited stock
Check motor compatibility before ordering. Please confirm this ESC is qualified for your motor in our list of qualified FOC combinations.
FOC ESCs must be tuned and certified with your motor and load (propeller) at our factory before use. They cannot be tuned in the field.
For any doubts, contact our sales team at [email protected] or +91 91511 18036.
The RD V-Series 80A ESC is a Made in India trapezoidal electronic speed controller for high-performance applications, in a plastic enclosure with an aluminium heatsink, rated IP56.
It runs on 4S to 8S LiPo packs and delivers 40 A continuous and 80 A peak for up to 20 seconds, tested in 12.5 m/s airflow at 26 °C ambient. It accepts PWM and DShot300 input and reports telemetry with PWM and DShot.
| S. No. | Parameter | Requirement | Remark |
| 1 | Voltage range | 4S (14.8V) – 8S (33.6V) | – |
| 2 | Commutation | Trapezoidal | – |
| 3 | Maximum Peak Current | 80A (20 s) | Tested in 12.5 m/s continuous airflow and 26°C ambient Temperature |
| 4 | Maximum Peak Power | 2240 W (20 s) | Tested in 12.5 m/s continuous airflow and 26°C ambient Temperature |
| 5 | Maximum Continuous Current | 40A | Tested in 12.5 m/s continuous airflow and 26°C ambient Temperature |
| 6 | Maximum Continuous Power | 1400 W | Tested in 12.5 m/s continuous airflow and 26°C ambient Temperature |
| 7 | Weight | 75 g (Incl. Wire) | – |
| 8 | Dimension (mm) | 92x38x22.50 | – |
| 9 | BEC Output Voltage | No | – |
| 10 | Operating Ambient Temperature | (-20℃) ~(+ 65℃) | – |
| 11 | Standby current (24V) | ≤ 36mA | – |
| 12 | Throttle Range | 1050us ~ 1950us | – |
| 13 | Recommended Throttle refresh frequency | 50 Hz to 450 Hz | – |
| 14 | Throttle I/P mode | PWM and D-Shot 300 | – |
| 15 | Over Temperature Protection | Yes | Limit at 100℃, Reduced to 50% throttle |
| 16 | Overcurrent Protection | Yes | – |
| 17 | Stuck Rotor Protection | Yes | – |
| 18 | Waterproof Rating | IP56 | – |
| 19 | Invert Motor Spin | Yes | Configured using RD GUI |
| 20 | Telemetry | Yes | With PWM and D-Shot |
| 21 | Input cables | Silicone wires-red/black- 14 AWG (14cm) | ±1cm |
| 22 | Output cables | Silicone wires-black(x3) – 14 AWG (14cm) | ±1cm |
| 23 | Signal wires | Silicone wires – black , white(2P),red(1P) 3P-JR Connector (16cm) | ±1cm |
| 24 | Enclosure | Yes | PLA Plastic + Aluminium heatsink |
2D CAD, 3D CAD files and datasheets for this product are available in the Downloads section.