RD PDB 150A Advanced

RD PDB 150A Advanced

RD PDB 150A Advanced

6S - 12S

Product Description

The RD PDB 150A is a power distribution board for professional UAV platforms. It combines power distribution, current and voltage sensing, ESC power filtering and CAN bus expansion in a compact board, and is compatible with Pixhawk flight controllers. Designed and manufactured in India.

Where the RD PDB 150A fits

The RD PDB 150A distributes power from a 6S to 12S LiPo pack to your ESCs and onboard electronics. The datasheet lists 100 A continuous current and a 150 A peak, two BECs (BEC1 at 5 V / 3 A, and BEC2 at 5 V / 3 A or 12 V / 3 A, configurable), 8 layers of 2 oz copper, and analogue voltage and current sensing with ±2 % accuracy. It includes four CAN ports and has no inrush protection. It suits multirotors that need clean power for a flight controller, GPS, radio and payload from one board.

How it compares

Among our power distribution boards, the 150A includes sensing and BECs, while the RD PDB 250A is the higher-current option, rated for 250 A continuous with 4 ESC connections, five 12 V and four 5 V supply points, over-current and short-circuit protection, and a weight of 15 g. Choose the 150A when you want sensing, CAN ports and configurable BEC outputs; choose the 250A for the highest current. For large motors such as the RD8030 160KV, check the peak current before choosing a board. Contact [email protected] for advice.

Specifications

S. No. Parameter Value Remarks
1. Input Voltage 6S~12S LiPo –
2. Peak Current 150A* –
3. Continuous Current 100A –
4. BEC1 Output rating 5V/3A –
5. BEC2 Output rating 5V/3A or 12V/3A Configurable
6. Operating Ambient Temperature (-20℃) ~ (+ 65℃) –
7. 12 Volt supply points and rating 3 points (Power-2, Configurable) Configurable and 3A (aggregate)**
8. 5 Volt supply points  3 points  3A (aggregate)**
9. Layers of Copper / Copper weight 8 layers / 2 oZ each –
10. Inrush Protection No –
11.  Sensing (Voltage and Current) Yes Analog Output (± 2% Accuracy)
12. CAN Port 4 Ports (Solderable Points) –
13. Weight 35 gm Excluding wires and external capacitors
14. Number of ESC connections 4 –
15. Flight controller connector 6 Position Receptacle Connector 0.079″ (2.00mm) Part number : 5024940670 (Molex)
16. No. of external capacitors can added 4 Different capacitors provided with package and can be selected as per requirement

Engineering Data

2D CAD, 3D CAD files and datasheets for this product are available in the Downloads section.