RD6218 160KV

RD6218 160KV

RD6218 160KV

160KV | 12S

Product Description

RD 6218 is a brushless outrunner motor with a KV rating of 160KV, Made in India. It operates within a 12S voltage range and features advanced cooling for reliable performance and durability under high-thrust conditions.

The motor can handle a continuous current of 25A and is capable of generating a peak power output of 2.4 kW. It is designed for seamless compatibility with 22-inch to 24-inch propellers.

Where the RD6218 fits

The RD6218 is a 160KV outrunner for 12S (up to 50.4 V) systems. The datasheet lists 12.5 kgf of maximum thrust, 25 A continuous current with a 50 A peak, 93.57 % efficiency, a 1.7 A no-load current and a weight of 408 g including wire. That combination suits mid-size multirotors, mapping and survey platforms, and payload-carrying craft where flight time matters as much as thrust.

The recommended propeller is the RD 2480 Propeller, and the recommended ESCs include the RD A-Series ESC 60A. Running at 12S keeps current low for the power delivered, which helps with heat in the motor, the wiring and the ESC.

How it compares

Among our UAV motors, the RD6218 is the middle option. The RD8015 115KV (115KV, 14 kgf, 509 g) trades a little more weight for a lower KV and 48 V operation, and the RD8030 160KV (23 kgf, about 900 g) is for much heavier airframes. If you fly on 6S, look at the RD7006 230KV instead. The motor is rated to 60 °C, so keep some airflow across it. For help choosing a set, write to [email protected].

Specifications

 
Product name RD 6218 UAV BLDC MOTOR
Country of Origin  India
Motor Type Outrunner
KV Rating 160 KV
Maximum Thrust 12.5 kgf
Stator Poles / Magnet Poles 24/28
No load Current 1.7 A
Motor Efficiency 93.57 %
Weight (Incl. Wire) 408 g
Voltage Range 12S (up to 50.4 V)
Peak Current 50 A
Continuous Current 25 A
Motor Size Ø70 mm x 38.85 mm
Stator Size Ø62 mm x 18 mm
Cable Length 100 mm
Cable Type 14 AWG
Magnet Temperature Rating 150 ℃
Shaft Diameter Ø8 mm
Winding Material 100% Copper
IP Rating IP34
Maximum Operating Temperature 60 ℃
Recommended Propeller RD 2480
Production Status Production
Recommended ESC A-Series ESC 60A (FOC), T-Pro V3 ESC 75A, V-Series ESC 60A

Engineering Data

Motor RD 6218 160KV
ESC RD FOC 80A V4
Propeller RD 2480
Power source 48 V
Throttle % Servo (µs) Current (A) Power (W) RPM Thrust (g) Efficiency (g/W) Heat sink temp (°C) Motor coil temp (°C)
– 1050 0.0 0.0 0 0 0.00 33.5 33.6
0.0 1100 0.0 0.0 501 64 0.00 33.7 33.4
6.3 1150 0.0 0.0 501 68 0.00 33.7 33.4
12.5 1200 0.1 5.3 621 113 21.32 33.7 33.3
18.8 1250 0.2 10.8 971 326 30.19 33.7 33.1
25.0 1300 0.7 35.8 1333 686 19.16 33.7 33.1
31.3 1350 1.3 70.0 1672 1137 16.24 33.6 33.0
37.5 1400 2.3 120.0 2021 1692 14.10 33.5 33.0
43.8 1450 3.7 194.0 2371 2396 12.35 33.5 33.0
50.0 1500 5.8 301.0 2709 3155 10.48 33.4 33.2
56.3 1550 8.3 429.0 3058 3964 9.24 33.4 33.6
62.5 1600 11.2 578.0 3415 4967 8.59 33.3 34.1
68.8 1650 15.3 784.0 3763 6051 7.72 33.3 34.5
75.0 1700 19.9 1016.0 4116 7227 7.11 33.4 35.6
81.3 1750 26.2 1321.0 4459 8473 6.41 33.5 37.8
87.5 1800 33.0 1657.0 4817 9775 5.90 33.7 38.9
93.8 1850 41.9 2081.0 5169 11089 5.33 33.9 41.4
100.0 1900 54.0 2651.0 5556 12592 4.75 34.1 44.3
– 1950 53.2 2610.0 5546 12574 4.82 34.7 53.0

Maximum temperature after turning off the power supply: heat sink 39 °C, motor 85.5 °C.

Performance data tested at approximately 35 °C and 123 m above sea level in Lucknow, India.

2D CAD, 3D CAD files and datasheets for this product are available in the Downloads section.