RD 8015 Motor is a brushless Outrunner motor with a KV rating of 115KV, designed and Manufactured in India to operate within a voltage range of 12S.
The RD8015 is a 115KV outrunner designed for 48 V (12S) systems. Its datasheet lists 14 kgf of maximum thrust, a weight of 509 g including wire, 93.57 % motor efficiency and a no-load current of 1.04 A at 24 V. The low KV rating means it turns a large, slow-spinning propeller, which is the usual route to efficient hovering and longer flight time on mid-size multirotors and survey or inspection platforms.
Peak current is 46.58 A, so it works with the ESCs we recommend for it: the RD A-Series ESC 80A, the RD A-Series ESC 120A or the RD Q-Pro V2 ESC 120A. The recommended propeller is the HW3011.
In our UAV motors, the RD8015 sits between the lighter RD6218 160KV (160KV, 12.5 kgf, 408 g) and the RD8030 160KV (160KV, 23 kgf, about 900 g). Choose the RD8015 when you want the lower KV and the higher voltage for efficiency rather than the maximum thrust per motor. Operating temperature is rated up to 60 °C, so allow airflow over the motor in hot conditions. Contact [email protected] for help sizing a motor, ESC and propeller set.
| Product name | RD 8015 UAV BLDC MOTOR |
| Country of Origin | India |
| Motor Type | Outrunner |
| KV Rating | 115 KV |
| Maximum Thrust | 14 kgf |
| Stator Poles / Magnet Poles | 36/42 |
| No load Current | 1.04 A@24V |
| Motor Efficiency | 93.57 % |
| Weight (Incl. Wire) | 509 g |
| Voltage | 48 V |
| Peak Current | 46.58A |
| Motor Size | Ø89.50 mm x 38.50 mm |
| Stator Size | Ø81 mm x 15 mm |
| Cable Length | 100 mm |
| Cable Type | 14 AWG |
| Magnet Temperature Rating | 150 ℃ |
| Shaft Diameter (Internal) | Ø13.5 mm |
| Winding Material | 100% Copper |
| IP Rating | IP34 |
| Maximum Operating Temperature | 60 ℃ |
| Recommended Propeller | HW3011(NEW) |
| Production Status | Production |
| Recommended ESC | A-Series ESC 80A (FOC), A-Series ESC 120A (FOC), Q-Pro V2 ESC 120A |
| Motor | RD 8015 115KV |
| ESC | RD FOC 80A V4.2 |
| Propeller | HW3011 (new) |
| Power source | 48 V SMPS |
| Throttle % | Servo (µs) | Power (W) | Current (A) | RPM | Thrust (g) | Efficiency (g/W) | Heat sink temp (°C) | Motor coil temp (°C) |
|---|---|---|---|---|---|---|---|---|
| – | 1050 | 0.00 | 0.00 | 0 | 0 | 0.00 | 32.4 | 33.3 |
| 0.0 | 1100 | 7.70 | 0.14 | 498 | 163 | 21.17 | 32.4 | 33.3 |
| 6.3 | 1150 | 7.80 | 0.15 | 498 | 166 | 21.28 | 32.4 | 33.3 |
| 12.5 | 1200 | 9.50 | 0.18 | 576 | 219 | 23.05 | 32.4 | 33.3 |
| 18.8 | 1250 | 22.90 | 0.44 | 810 | 478 | 20.87 | 32.5 | 33.4 |
| 25.0 | 1300 | 46.70 | 0.89 | 1050 | 838 | 17.94 | 32.5 | 33.5 |
| 31.3 | 1350 | 80.80 | 1.55 | 1284 | 1348 | 16.68 | 32.6 | 33.5 |
| 37.5 | 1400 | 129.70 | 2.49 | 1530 | 1963 | 15.13 | 32.6 | 33.7 |
| 43.8 | 1450 | 196.00 | 3.77 | 1752 | 2702 | 13.79 | 32.7 | 34.0 |
| 50.0 | 1500 | 206.00 | 5.53 | 1992 | 3485 | 16.92 | 32.8 | 34.5 |
| 56.3 | 1550 | 392.00 | 7.60 | 2232 | 4426 | 11.29 | 32.8 | 35.0 |
| 62.5 | 1600 | 533.00 | 10.37 | 2460 | 5447 | 10.22 | 32.9 | 35.6 |
| 68.8 | 1650 | 727.00 | 14.19 | 2700 | 6648 | 9.14 | 32.9 | 36.4 |
| 75.0 | 1700 | 926.00 | 18.16 | 2934 | 7707 | 8.32 | 33.0 | 37.6 |
| 81.3 | 1750 | 1177.00 | 23.34 | 3124 | 9127 | 7.75 | 33.2 | 39.2 |
| 87.5 | 1800 | 1481.00 | 29.46 | 3414 | 10595 | 7.15 | 33.4 | 40.5 |
| 93.8 | 1850 | 1857.00 | 37.16 | 3642 | 12147 | 6.54 | 33.6 | 43.7 |
| 100.0 | 1900 | 2343.00 | 47.53 | 3872 | 13934 | 5.95 | 33.7 | 47.1 |
| – | 1950 | 2408.00 | 48.99 | 3912 | 14203 | 5.90 | 33.9 | 53.0 |
Maximum temperature after turning off the power supply: heat sink 41 °C, motor 66.7 °C.
Performance data tested at approximately 35 °C and 123 m above sea level in Lucknow, India.
2D CAD, 3D CAD files and datasheets for this product are available in the Downloads section.