Field-oriented control, or FOC, is the control method behind our A-Series ESCs. We compared it with trapezoidal control in FOC vs trapezoidal ESC. This post goes one level deeper and explains how FOC actually works and why it matters for a drone.
The idea in one paragraph
A brushless motor produces torque when current in the stator windings creates a magnetic field at the right angle to the rotor’s magnets. Trapezoidal control approximates that by switching current in six steps. FOC instead controls the current continuously, so the magnetic field stays at the ideal angle to the rotor at every instant.
What the ESC does
- Measures the current in the motor phases and estimates the rotor’s position and speed.
- Transforms those measurements into two values: the part of the current that produces torque and the part that does not.
- Controls each part with its own feedback loop, so the ESC delivers the torque the throttle asks for using as little unwanted current as possible.
- Drives the three phases with smooth sinusoidal waveforms.
What this means in practice
- Efficiency. Less wasted current means less heat in the motor and the ESC, which matters most at part-throttle hover, where multirotors spend most of their time.
- Smooth, quiet running. Sinusoidal currents reduce torque ripple and audible noise.
- Precise response. Torque follows the command closely, which helps flight controllers hold attitude and altitude.
- Protection. Because the ESC measures current directly, it can limit current and detect faults accurately.
What FOC asks of you
FOC needs to know the motor. Its settings describe the motor’s electrical characteristics, and the quality of the result depends on how well the ESC, motor and propeller work together. We cover this in the next post, on matching a propeller to a motor for FOC performance.
Where to see it
Our FOC range includes the A-Series 80A and 120A for 6S to 12S systems. Check each datasheet for the exact specifications.
Talk to our engineers
If you are planning a platform and want help choosing a propulsion setup, email [email protected] or call +91 9151118036. You can also try the Drone Builder to size motors, ESCs and propellers for your aircraft.

